RCU Forums - View Single Post - BME 44 and 50 carb mounting
Thread: BME 44 and 50 carb mounting
View Single Post
Old 05-24-2002 | 06:35 PM
  #2  
Antique's Avatar
Antique
Senior Member
My Feedback: (4)
 
Joined: Jul 2002
Posts: 9,825
Likes: 0
Received 1 Like on 1 Post
From: Somewhere, DC
Default Carb mounting
the carb always attaches to the engine with 2 bolts..If there are set screws they only serve to help hold the ring to the cylinder..The pulse will come through the mounting plant or through a new fitting on the case to the back of the carb....
Antique is offline  
Reply Like