Hey Guys, I Finaly got the chance to take my UCD .46 out a few times. The first flight was a little hairy, for some reason, I had gotten really bad flutter on the elevator. Luckily, I cut the throttle intime to catch it before the back end ripped off and I managed to get it down. When I looked at it, the entire Horiz. Stab was flopping around, and the fues was cracked pretty bad back there. I reinforced the fuse with some plywood and took her back up. So far, the UCD .46 has been a great flying plane. Im running the .61FX on it with a 12X6 Zinger. Im going to be swithing props to a 13 or 14X4, so we will see how it does. It has unlimited vertical, but I dont like the speed. Im usualy flying it around 1/4 throttle or less. It seems to hover pretty good at about 1/2 throttle.