RE: Choosing the right density Balsa for a build
Hey CafeenMan thanks for the post.
You are mention a need for the specific, so here is my specific! [:-]
On the Mick Reeves 1/6 Spitfire wing ( 74" ) the centre section has 2 mainspars both 1/2" by 1/4".
The main wings have top and bottom main spars 1/4" by 1/4" and rear spars 1/8" by 1/8".
Should any of these be spruce or just dense balsa is the big question?
Nigel Wagstaff