When I sheeted the outer tips, I sanded the tp of the ribs a bit until it looked about right to make the balsa flush to the LE and spar. In other words, using 1/32" balsa I took off about 1/32 of the top of the front part of the rib. It wasn't done scientifically, though.

Any news on the Spirit Elite fuse, and the Select rebuild? I have 3 Spirits and a Spectra at the house I am trying to get back together. Basically just need to order about a dozen microservos to do what I want to. Plan is to replace the 3103's with micros, as well as put micros in the wings to activate spoilers. I am considering building one of the wings as a straight full house wing for the fun of it....