I need some help and I'm not sure where to start. First of all I have a cap with at Da 100 for power on it and I'm a little tail heavy. Every time I pull up into a hover to torque roll I have to give serious up elevator just to hold the plane vertical. I can torque roll pretty decent with other planes(especially with the electrics) and on average I can get at least ten or more revolutions. I'm stumped with this plane. I used to own a hanger 9 sukoi and I could t roll the heck out of it with no problems at all.(Man I really miss that plane!!!!)Even on high rates of at least 45 degress or more the plane wants to nose over. Is this a thrust issue? Do I need more down or up thrust or possibly right thrust? I tried to add up thrust but it really did not do much.
Does anyone have any ideas as to why this plane is soo hard to torque roll? Please help. I'm losing interest in this plane and really don't want to sell it. This plane just does not want to stay vertical when I hang it on the prop. Any help would be appreciated.