I ordered a 50sx and another cowl. I had already put in the other engine when I found out it was terrible inverted (it's almost as if the low and high speed neelde go from too lean to too rich by just breathing on them - even with a fuel regulator).

Yeah I skipped the wheel pants cause I fly off grass - even tho I run pants on my 60 size with no problems - we pay a pro to cut the grass at least once a week,sometimes more.

My wheel pants were the worst looking wheel pants. Down the middle at the seam I had a good 1/8" where it looked like they used a glue that melted the fiberglass. There was a serious indentation and no paint all the way down the seam on both of them. Major ugly.