Nearly got a box now[8D]

Tip the fus over ( Trying not to let it all fall apart doh!) and place the top rear on followed by the top front and tape all together firmly. I then turned it back over and taped the bottem up tight so nothing could move

Place fus on line drawn on workbench an line up all the little marks in the bottom of the formers to ensure you have a perfectly sqare fus (Nice thinking CA models [8D] first time I have seen this idea and I have built between 30 and 40 models in my time!!)

And the fun bit begins squirt cyno everywhere wood touches wood and its all together![8D]

Then we stick F1 on with epoxy and the front turtle deck again with epoxy.....measure back and epoxy the rear turtle deck on....hey presto starting to look like a plane all ready!!