Hi, there. I just bought a u-can-do 60, it's still in the box, but something in the manual caught my attention. According to the instructions, if I don't have ailevator programming in my radio, I should use a reversing harness for one of the elevator servos. Now, looking at the pictures on page 19, showing a setup without mixing, it clearly shows elevator servos at different locations relative to the elevators with the servo arms in opposite directions. Obviously, with this kind of setup (just like my now departed Laser 3D), there's no need for a servo reverser. I have a computerized radio but it has no ailevator capabilities,and I do have a servo reverser but I don't know if I should try the manual's setup first. Please advise. Thanks.