RCU Forums - View Single Post - 3DFoamy.com SU 26 MX
View Single Post
Old 03-27-2004 | 12:08 PM
  #8  
FNG's Avatar
FNG
Senior Member
 
Joined: Feb 2003
Posts: 180
Likes: 0
Received 0 Likes on 0 Posts
From: Vancover, WA
Default RE: 3DFoamy.com SU 26 MX

ORIGINAL: 3D_Foamy

FNG,

Do you have any more shots of your SU26?
I do, I'm at work now so I'll have post them later. I finished the SU26 up last night, when I was going back to the plan for the CG I discovered that some how I had placed the too far aft, like 2 1/2" too far aft, Dont ask how that happened. After I was over being stupid, I elected just to finish it and fly it as is. All up weight ready to fly is 12.6oz. Well, I just got done flying it in the hanger at work. It flys real well, nice slow flight, way easy to harrier, alittle wing rock, but not bad. I'd say its the easyest plane to hover that I've had yet, that may be due to my skew up making it a shorter tail, and longer nose moment. All in all I'm impressed with the airplane, it looks great in the air. I'm going to build another one correctly.

I'll get some pictures posted later