RCU Forums - View Single Post - DA50 Needle Settings
View Single Post
Old 03-31-2004 | 09:24 PM
  #9  
Mike Bogh
Senior Member
My Feedback: (14)
 
Joined: Dec 2001
Posts: 2,460
Likes: 0
Received 0 Likes on 0 Posts
From: MT Vernon, WA
Default RE: DA50 Needle Settings

I took a fuel dot and installed it in my cowl directly across from the carb needles. Pull the dot, VoilĂ*! access to both needles, dot back in easy as pie, no unsightly hole....
And FWIW, here in Washington, I had to richen my low speed needle a wee bit...1/4 turn fat from stock. Now after a gallon I'm getting terrific throttle response. (Not as quick as my Brison 3.2, yet[])
And to agree with the above this DA~ 50 rodds!!
4 or 5 snaps on the vert up line on my Wild Hare Edge, still pulls it outtasight.
Blasts outta hover..authority my arse, jumps out is more like it.