RCU Forums - View Single Post - Lancair assembly problem
Thread: Lancair assembly problem
View Single Post
Old 04-06-2004 | 02:00 PM
  #2  
JCGeorge
Junior Member
 
Joined: Dec 2003
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
From: Derby, KS
Default RE: Lancair assembly problem
I had the same problem with my Lancair, I used a small file to enlarge the holes in the fus.
taking out the material just between the holes. Ended up with a very tight fit.

Hope this helps
Jim George
JCGeorge is offline  
Reply Like