RCU Forums - View Single Post - OS 46 FX rattle noise
View Single Post
Old 04-14-2004, 09:32 PM
  #13  
CheezeyPoof
Banned
 
Join Date: Jan 2004
Location: a
Posts: 136
Likes: 0
Received 0 Likes on 0 Posts
Default RE: OS 46 FX rattle noise

Going along with what he said, I have seen a few like this and they had too much prop, The fix was a smaller either by diameter or pitch or both, but don't rule out bearings.


ORIGINAL: William Robison

UandA:

Strange as it seems, it is possible to have detonation at part throttle and not at full. Just for a test, try a 10x6 prop in place of your 10x7 and see if it changes. If it improves, the 10x6 is well withing the acceptable range of props for the engine, just leave it on or go to an 11x5 and try that.

Bill.