RCU Forums - View Single Post - U Can Do 3D
Thread: U Can Do 3D
View Single Post
Old 04-18-2004 | 05:58 PM
  #2091  
coomarlin's Avatar
coomarlin
Senior Member
My Feedback: (1)
 
Joined: Oct 2002
Posts: 1,015
Likes: 0
Received 0 Likes on 0 Posts
From: Morgantown, WV
Default RE: U Can Do 46 and 60 prop/rpm
ORIGINAL: NOVAflier

I am thinking that the fuel line from the out side of the cline to my carb may be too long. I made it pretty short, but it still may be too long. If you think about it, the longer that line, the more fuel there is after the cline stops pulling for the carb to burn off.. sound right?
That line should not be any longer than 1.5 inches. The shorter the better.
coomarlin is offline  
Reply Like