RCU Forums - View Single Post - Problem Reinforcing Main Landing Gear
Thread: Problem Reinforcing Main Landing Gear
View Single Post
Old 05-07-2004 | 05:38 AM
  #3  
DBCherry
My Feedback: (4)
 
Joined: Jan 2002
Posts: 5,550
Likes: 0
Received 1 Like on 1 Post
From: Hubbardston, MA
Default RE: Problem Reinforcing Main Landing Gear
I agree, 30 minute epoxy. CA does not penetrate plywwod very well, and I've never gotten a good ply joint with it.

I would clamp the ply in after applying the epoxy and wait 24 hours for a full cure before doing anything like drilling it though.
Dennis-
DBCherry is offline  
Reply Like