Hey All,

I finally got my Fox 29 from my parents place and took it apart to clean and make sure everything was working ok. Well it looks like this engine is toast! The top of the piston has a small barrier...not sure how to explain it. The top is flat with a small wall on top of it. Looks like it may be to keep the exhaust from going back down the intake side of the cylinder. The sleeve is in good condition, the carb is in fair condition but everything moves - -no friction - the exhaust baffle moves freely as well. If I can ever get a hold of a digital camera I will post some pics of it. I guess the only thing I would need to get this thing running is a new piston (and sleeve?) and a long plug....the one in it is a short plug and it just doesn't quite reach the end of the head!!

If anyone possibly has parts for this old engine please PM me!

Thanks all