Well ok guys thanks again for all the advise... I've finnaly made up my mind I got the plane kit from fedex yesterday and started putting it together today. I shure hope it flys better than it looks in the box what a pile o cr.....! The lower fuse halves are so warped I had to use epoyx and clamps just to get halves to join to themselves and doublers to join up But I guess I cant complian to much for only 70$ The rest of the kit is much better although there are still manny warped pieces. This build should be a cake walk for me but the real chalange is building a strait plane out of a bunch of banna shaped lumber Well in making up my mind I decided upon going with the b-wing less dihederal and rubbers. After giving it some thought I'll probably give the thing to my 12 year old son next summer anyways and buy me a low wing job. The way I see it is by then I'll probably want somthin new anyway and it wouldn't hurt to let my kid have a go at this one so I'll keep it with some dihederal and more forgiving pop off wings (I saw him attempt to fly at the same open house as me and it wasn't perty)Again thanks to all everyones thoughts were considered.