hey guys will the futaba 3010's work good for the rest of the servos, or do i need something stronger, im going with the GY401 gyro and the futaba 9254 servo for that. I just have some 3010 laying around if i could use them it would be better. I planned on a 3004 for throttle, but the rest would be 3010's and the gy401 with the futaba 9254, also do i need to apply loctite to the boltrs and nuts on the heli that has already been assembled from the factory or should those be okay and just loctite the rest of it as i go, also is this a good simulator to get http://www2.towerhobbies.com/cgi-bin...?&I=LXEPH6&P=0 for helping me on my caliber 30 thanks mike lansford