RCU Forums - View Single Post - learning the tricks
View Single Post
Old 06-06-2004 | 01:21 PM
  #1  
rp56
Junior Member
 
Joined: Nov 2003
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
From: Woodland, WA
Default learning the tricks

hi, i have been flying planes for a few years at the rate of 3 to 4 times per week. i have looked high and low for a book the teaches people how to do the 3 moves. i have a few planes that can fly 3d if i knew how to make it dance. i have a scale citabria 40 that i like to fly alot but its slow and relaxing, few basic tricks rolls, loops, so on ..... the 2 planes i like to rip around are the hanger 9 aristia 40 and my Cap 323. i have a little cheapy fun 51 profile plane to try new stuff with then move to my good planes. at this point i try flat spins but can get it to happen. i stall it out going vert as the plane tips in the stall i give full up elv. and right ali. and full right rudder. then as the plane starts to build a litte speed i cross the rudder back over slowly. it just flops and tumbbles, no spin.

well to get to the point here, i am looking for a book or mag. the will teach you the steps. i have real flight too but have problems with that as well on 3d.

any tips would be a great help

thanks

Paul