RCU Forums - View Single Post - servos for 33% edge for 3D flying
Thread: servos for 33% edge for 3D flying
View Single Post
Old 07-21-2002 | 12:33 PM
  #3  
3D_CAP232
Senior Member
 
Joined: Jun 2002
Posts: 306
Likes: 0
Received 0 Likes on 0 Posts
From: Leicester,
Default servos for 33% edge for 3D flying
Jr 8411 or futaba s9206
I would stay away from hitec as they do suffer from centering problems, especialy with the linkage geometry required for 3D.
3D_CAP232 is offline  
Reply Like