Well another five flights last Saturday and the landing gear and tail are still in tact and still under powered with the Saito 65. Next weekend I'll have the Enya 80 or Tower Hobbies 60 installed. My CG is 5 1/4 back from the leading edge. I'm think I'm going with the Enya first. If people are using 56's with no problems, the 60 should do the job quite well. I have a Futaba 3010 servo on the rudder and 3001's on eveything else. I will upgrade to 4-40 or carbon fiber push rods and stronger servos when my skills upgrade. For now I'm just getting use to flying the model. I read where some people say this model is sensitive to fly even on low rates. This is not true. This model is VERY sensitive. I kicked in 80% expo and I'm really stating to get more comfortable flying the model. I've also been concentrating on learning throtle management. Looks like it's all starting to come together. Any sugestions on a 3D model for my YS 120?
Maekju