RCU Forums - View Single Post - Need Help
Thread: Need Help
View Single Post
Old 08-08-2004 | 08:06 PM
  #2  
Pond Flyer
Junior Member
 
Joined: Jun 2004
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
From: Elma, WA
Default RE: Need Help

I think I have solved the problem. After completly discharging the battery, and recharging it the motor ran for a little over 6 min at full power. The speed 600 draws 11 Amps at full power, and 1.8 Amps at idle. The battery must not have been charged right the first time. I disabled the low voltage cutout on the controler because of the seprate power supply for the radio, amd servos. I should now have about 10 min. flying time. Is there a battery around 8 Oz that will give Me more flying time?
THANKS