Here is the set-ups I used at the Masters:

Plane: Composite-ARF.com 3 Meter Extra, Shulman scheme
Radio: Futaba 9Z WC II
Servos: Futaba 9206's on ailerons (3 each) and elevators (2 each), 3-9152's
on rudder, 9602 on throttle and choke
Rx's: 2- Futaba 149 DP
Extra's: 3- Futaba MSA-10 servo matchers, 1 each aileron, 1 on 2 rudder
servos
Motor: RC Showcase ZDZ-160 Champion with Falkon Ignition
Exhaust: RC Showcase standard mufflers
Batteries: Duralite 1900 4-cell Li-Ion for Ign, 2- 3600 4-cell Li-Ions for
Rx's, 6-volt regulators on all
Props: AirModels 32.5x11 2-blade for patterns, 32x10 MenzS 2-blade for
freestyle
Spinner: Tru-Turn 5" P-51 spinner for patterns, none for freestyle
Smoke system: TME Simple Smoke 2, 24oz. Du-Bro tank
Graphics: Kirby's Kustom Graphics
Tail wheel: Graph-Tech RC 30lb carbon tail wheel with Mark Hale spring
assembly
Pilot: [link=http://www.composite-creations.com]Composite-Creations.com[/link] F-1 Pilot with last minute SA Custom paint job
Miscellaneous: Du-bro hardware, Shulman Aviation servo leads, J-TEC clamp
locks, Vel-Tye hook & loop, Jersey Modelers fuel can

Special thanks to:

Scott Anderson and the Anderson family
Kevin Young
Mark Hale and Hartness International
My Family
Dave Stodart
Pat and Mary-Lou Hartness
ALL of the Triple Tree/Confederate Air Farce group
ALL the judges and scribes
Warren Thomas
Don Lowe
Sean Plummer, Tim Garcia and Ric Fix
Frank Noll
Mike Dooley
Dennis and Debby Kirby
Ric Obenberger
Dan Rocha and Bill Prichett
Ivan Kristensen and Bob Hudson
Bryan Gillmore
Billy Hemple
Brad and Ed Hooper
Dan Alley
Ray Labonte and Andy Kane
And hopefully I'm not missing anyone else.

A couple of pictures of the Extra and a shot of the Composite-Creations.com F-1 Pilot.