RCU Forums - View Single Post - Pull Pull Set-up Question
Thread: Pull Pull Set-up Question
View Single Post
Old 10-17-2004 | 10:25 PM
  #3  
voyager_663rd
 
Joined: Feb 2003
Posts: 1,244
Received 0 Likes on 0 Posts
From: Toronto, ON, CANADA
Default RE: Pull Pull Set-up Question
Great. Thanks for confirming the clevis (with the pin hole ) is attached to the servo arm b4 pulling the cable tight.

Thanks.
voyager_663rd is offline  
Reply Like