RCU Forums - View Single Post - Chip Hyde's Vision 3D
Thread: Chip Hyde's Vision 3D
View Single Post
Old 11-10-2004 | 05:36 AM
  #55  
Daryl g lane
Junior Member
 
Joined: Sep 2003
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
From: brandon, MS
Default RE: Chip Hyde's Vision 3D
I used JR 8611s on all control surfaces and 8231 on throttle and choke.batteries that I used were Kokam 2000 mah on engine with a Dura-lite reg. and a JR 1800 mah 6-v under the receiver.fuel tank is a dubro 20oz and wheels are dubro also.AS far as CG I put the plane together by the instructions
Daryl g lane is offline  
Reply Like