I have read most every thread on RCU concerning this plane and have actually sent their C/S 2 emails and am impressed by their responses and I haven't even purchased the plane yet. Even after they raised the price from 149.99 yesterday to 159.99 today, it's still a great bargain (hope they won't see this and keep upping the price ).

To that end, the order will be placed in the next few days and I was wondering what everyone is using for their servo choices.

I am aware that they require only standard servos but I like to go a little bit overkill in this area.

Planned configuration is this and the plane will not be flown for 3D, just IMAC schedules up to Sportsman:

1) Saito 100 or OS 91FS (still undecided)
2) Hitech or JR servos (undecided, purpose of this post) Radio is JR 6102 PCM reciever
3) Adding tail braces made from slimline aluminum tubing on the upper and lower horizontal fin or even possible using CF rods
4) Bracing the tailwheel mount area with light ply and possibly going to a Sullivan tailwheel.
5) Not sure how I am going to deal with the belly pan issue yet but brass inserts sounds like the way to go.

During the building and the maiden I will be snapping pictures and getting video for a planned review of this plane here on RCU.

Any and all suggestions are welcome