only thing that stumped me is the landing...IT DOESN'T FLOAT !!! you have to fly it very low, pull a basicly easy harrier and chop the power right as it touches down...I fly 1/4 scale edge and other high performance planeS...this thing, now I do have a brushless, is a blast and a half..on a 1200 mah lipo 3c your fingers are tired after 12 minutes due to constant flying of the plane, you have to stay one step ahead of it..it's a great learing tool... my son who is 11 soloed about 2 months ago flys mine, now I make him keep it off the deck and don't let him take it off, toss it, or land it but he flys the heck out of it, can torque roll, knife edge loops and all..it's a trip....I'm the one that has busted the heck out of it doing rolling harriers 2 feet off the deck and touching the tail torque rolling..little glue and back in the air in 5 mins. oh epoxy is heaver but it makes rock solid repairs compared to CA.

HAVE FUN

JUST REMEMBER NO AIRFOIL ON THE WING, NO PROP TURNING, NO FLYING..JUST DROPING, EVEN WITH FULL UP ELEVATOR !!