RCU Forums - View Single Post - YOUR Extreme Flight 68" Yak setup?
View Single Post
Old 12-12-2004 | 08:34 AM
  #4  
I & C Tech's Avatar
I & C Tech
Senior Member
 
Joined: Nov 2002
Posts: 643
Likes: 0
Received 0 Likes on 0 Posts
From: Burgaw, NC
Default RE: YOUR Extreme Flight 68" Yak setup?

YS 1.10
Magnum 30% Heli fuel
Tru Turn 2-3/4" spinner (TT-2752-B-120)
APC Props 17x6 16x6 16x4W
Performance Specialties muffler w/ 90 deg elbow (drilled and safety wired to engine mount)
Hyde Soft Mount
605BB on throttle (mounted inside engine box)
Stock tank reinforced w/ strapping tape
5925's on ailerons and elevators
Dubro Super Strength servo arms
5945 on rudder
Airwild 3" MLP servo arm on rudder
Airwild 4-40 Cable Attach Fittings on pull-pull cables
Dubro 4-40 Swivel Ball Links on all servo arms with standard hardware making up the rest of the rod
Central Hobbies tailwheel assembly
Batteries America 2100 mah 6.0 volt NiMh pack (very light for 2100) mounted OVER the engine (Thanks Clam!)
Central Hobbies MKD Remote Glow Plug Connector and Harness
Hanger 9 Fuel Dots
JR Switch w/ charging jack
Futaba 149DP Rx
Futaba 9CHP Tx
One big smile everytime I look at it
One GIANT smile everytime I fly it!