Here's another weight saver for the guys that are building electrics. I have a new landing gear mold completed and will start casting gear before the end of the year. I have two firm orders so far and would like another couple. Features are as follows:

The landing gear comes complete; struts, pants, axles and 2 3/4" lite wheels are included
Carbon and special composite struts; fiberglass/carbon composite pants; the simplest, lighest and most ingenious axles in the business
Pants, struts and axles are all perfectly pre-aligned
Post cured struts--no summer sag
A new, easy to align design; footers are practically self aligning on your fuse.
Height from mounting base to wheel bottom is 11 1/4"; enough clearance for 24" props.
Wide track; approximately 20", depending on your fuse width
Gear sets are painted with PPG polyurethane primer; ready for final paint.
And lastly, the weight of this gear, complete, both sides, is projected to be less than 6 ozs.

If interested, contact me directly please, at [email protected]

Matt Kebabjian