Hey Reuben,

All I used was the three view drawings of the plane. I got the shape by eyeing seveal photo of the bird, (I haven't seen a model of this plane in the U.S.) measuring the different lines on the plans and using good old imagination.
The plane looks like it should except for the exhaust, which I left slightly square. (The aft end of the model is foam. Not to save weight but to expand my building expertise.) The wing was enlarged, because it's a sport scale model and I wanted something that will fly as a jet trainer.
There is no rudder on this plane, the stabs are fully functional and I also have ailerons but no flaps. Just a barebone blow it out your but jet trainer.

Tamecat