RCU Forums - View Single Post - U Can Do 3D
Thread: U Can Do 3D
View Single Post
Old 12-22-2004 | 11:20 PM
  #2600  
gjeffers's Avatar
gjeffers
 
Joined: Sep 2004
Posts: 2,307
Likes: 0
Received 4 Likes on 4 Posts
From: Round Mountain , NV
Default RE: U Can Do 3D

my cg is 5.25 w/saito 100 . i have tank over cg and throttle servo right in front of tank against front wing bulkhead , my batt is behind tank. i have a apc 15x6 w a 2.5 in tru turn spinner.carbon fiber rods on all servos w/reverser for ele servos in rear compartment. no extra weight anywhere!!! this is a very good flying and landing setup for this plane. good luck vega76!!!