ORIGINAL: DEVILDOG
I was thinking of going to Hi Tech servos. I know alot of people that have swithched to them with no problems.
However they are not flying turbines models.
I was looking at the 5645s
any opinions on this would be appreciated
Scott,
This is an FAQ. Do a search of the jets forum for HiTech servos and you'll see a lot of discussion. Personally, I've used HiTech digitals in my DPM Extra 300 with no problems, but I've heard 1st hand stories from guys I trust who have had HiTech failures, but almost none for JR or Futaba, and my experience with JR and Futaba mirrors that. YMMV.
Bob