RCU Forums - View Single Post - Chip Hyde's Vision 3D
View Single Post
Old 01-08-2005 | 09:05 AM
  #130  
H
 
Joined: Aug 2004
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
From: coleshill, UNITED KINGDOM
Default RE: Chip Hyde's Vision 3D

I have used 3" stand offs as per mk1 online manual CG was to far forward. Now using 11/4" as per the mk2 manual and CG is now just behind the wing tube which is much better. However I am still getting a pitch down effect as throttle increases even after increasing the thrust line angle to one degree+ up in relation to the firewall. I am also having to fly with elevator up trim. I appreciate there are two issues here but does any one have any experiences or comments?