RCU Forums - View Single Post - 3 blade vs. 2 blade rule of thumb
Thread: 3 blade vs. 2 blade rule of thumb
View Single Post
Old 01-12-2005 | 09:02 AM
  #8  
Fastsky's Avatar
Fastsky
 
Joined: Dec 2001
Posts: 2,997
Likes: 0
Received 1 Like on 1 Post
From: Calgary, AB, CANADA
Default RE: 3 blade vs. 2 blade rule of thumb
I have always read that you have a choice of reducing the length by 1" or reducing the pitch by 1" works. Being that the most practical reason to go to 3 blade is to get more ground clearance while trying to keep similiar performance then the reducing the length method comes into play[8D].
Fastsky is offline  
Reply Like