RCU Forums - View Single Post - sand in engine
View Single Post
Old 01-29-2005 | 02:46 PM
  #7  
ncgrunt
Senior Member
 
Joined: Nov 2004
Posts: 562
Likes: 0
Received 0 Likes on 0 Posts
From: , NC
Default RE: sand in engine

It's not difficult at all, but if you don't want to do it take it to your lhs if you have one.

Do not run it again until it's had a complete cleaning. And you may as well expect to have greatly shortened piston/sleeve life.