RCU Forums - View Single Post - U Can Do 3D
Thread: U Can Do 3D
View Single Post
Old 02-01-2005 | 11:00 AM
  #2639  
gjeffers's Avatar
gjeffers
 
Joined: Sep 2004
Posts: 2,307
Likes: 0
Received 4 Likes on 4 Posts
From: Round Mountain , NV
Default RE: U Can Do 3D

hey tknobby, got my saito back and ill see how long these bearings last because im gonna do a chart on all things and hours done to and run in on it and if it dont last its going back and them and you guys will here, good or bad so if they turn out all right ill post here and if they dive same goes.

there is one thing im gonna do different since these engines are inverted while stored im gonna try turning the plane upside down every few days when i walk by while stored since all the oil seames to run to the valve covers and get the oil back to the bottom and turn the prop a few times and re-oil the bearings.

later Gary