RCU Forums - View Single Post - Update on GS40 leaning problem
View Single Post
Old 02-09-2005 | 12:53 PM
  #14  
BlackB12
My Feedback: (9)
 
Joined: Sep 2004
Posts: 426
Likes: 0
Received 0 Likes on 0 Posts
From: Sinking Spring, PA
Default RE: Update on GS40 leaning problem

Let me try to explain it better.

I started it and tuned it to run full throttle at 12,500 rpm. It ran like this for about 3 minutes, then like I mentioned in about 30 seconds, started gaining rpms up about 14.5K rpm. I'll run it again and look at when it gains rpm.

MIke