RCU Forums - View Single Post - Esskay-powered Tensor 4D
View Single Post
Old 02-18-2005 | 03:44 PM
  #15  
Devin McGrath
Senior Member
 
Joined: Apr 2004
Posts: 663
Likes: 0
Received 0 Likes on 0 Posts
From: Rochester, NY
Default RE: Esskay-powered Tensor 4D

well sure this is the first time these have been "released" on the Internet but its really no secret its just all light stuff ....

[ul][*] AXI 2204/54 [*] CC Phoenix-10 speed controller [*] GWS R4-P Rx. [*] Blue Arrow 3.6g servos for rudder & elevator [*] GWS Pico servo for ailerons (really needs an HS-55)[*] Kokam 340mAh 3-cell pack (this brought mine to 6.9 oz)[*] Kokam 340mAh 2-cell pack (it was 6.4 or 6.5 after some repeated gluing)
[/ul]

Also build very light i almost used none of the original hardware in the tensor it's not going to get to 7 oz on this set up without some serious work in keeping it light