RCU Forums - View Single Post - adding weight to firewall
Thread: adding weight to firewall
View Single Post
Old 02-20-2005 | 11:56 AM
  #12  
Deadeye's Avatar
Deadeye
Senior Member
 
Joined: Jul 2002
Posts: 4,516
Likes: 0
Received 2 Likes on 2 Posts
From: Dutton, MT
Default RE: adding weight to firewall

ORIGINAL: Richard L.

5-minute epoxy is not fuel proof. 15-minute epoxy is 50% fuel proof. 30-minute epoxy is 100% fuel proof. There is no need to thin the epoxy if you use either 30-minute or 45-minute epoxy.
My thinned 5 minute (actually 6 minute) takes over an hour to cure, and about 24 hours to harden. Does this qualify as fuel proof? Is it all in the cure time? You've got me worried now.
Deadeye is offline  
Reply Like