After a lot of preparations I finally got time to start building my Sig SE. After having asked previously in this forum I've chosen the Irvine 53 for the engine. Here's that thread: [link=http://www.rcuniverse.com/forum/m_2286194/anchors_2286194/mpage_1/key_/anchor/tm.htm#2286194]Engine[/link]

The modifications I've decided to do after asking for advice [link=http://www.rcuniverse.com/forum/m_2695937/anchors_2695937/mpage_1/key_/anchor/tm.htm#2695937]here [/link] are:

1. Using Sulivan tailwheel assembly. Use plywood for the last section underneath.
2. Modify the tank compartment such that the tank can be removed.
3. Change out the push-rods.
4. Sheet the turtle deck.

I've started building the left wing. This is how far I've gotten between yesterday and today: