Resetting Hitec Digital servos
Here's the scoop guys and gals. I closed a similar thread as I felt it was headed in the wrong direction and wanted things to cool down a bit and hopefully get back on a good track. Now we have a new one going and after confering with Bill we felt it was a good idea to keep it going and I agree. There are some ground rules though that need to be followed for it to continue, simple ones really. You will discuss the issue at hand in a mature fashion so all information can be assested, but if you post something that is over the line it will be closed down. We will not have a slam session going here so if you don't like the Hitec servo, and feel it's garbage then just keep it to yourself as that's not a constructive post. Let the discussion begin!