I had an fun time flying yesterday, I actualy hovered the plane a few times(up high) did a few touch and goes. I even moved the cg back to about 5 inches, increased the rates on the elevator and aeilerons and was having a ball. Then on a touch and go, very slow, the landing gear touched, and stayed and the plane kept going. Was able to belly land the plane because of the slow speed and the only damage was the landing gear falling out and a few bumps and knicks on the bottom of the fuse from the landing. Going to take a few pics of the damage and send it to great planes. Did not look like there was very much glue on the landing gear block at all, just some on the triangels. No craced balsa, or any thing like that. Going to wait until I get a reply fro great planes before I put the gear and the brace back on.