Hey guys, thanks for looking. I have been working on this plane all day and I am getting super aggrivated with it. I have it all done and she is a beauty! The motor DA50 Starts and runs like a top! I cant wait to fly it, but I cant get a good range check. I get maybe 70ft with the antenna down and motor running. The servos (all) have an intermittent jump with the motor on or off and doenst matter what range, even next to it. I changed recievers, jump still there, changed radios, jumps still there, changed the servos 1 by 1 and the jump is still there. Motor on, or off, even standing next to it they jump to almost half throw and then return to center about every 15seconds. I have gotton rid od ALL metal to metal connections and it still jumps. I have never used uncoated wires on the pull pull, could this be acting as an antenna? Something is conduction some major interferrance in this sucker. I just dont know what else to eliminate. I am using all hitec 5645s and a JR 8611 on the rudder. I just cant figure it out. Thanks guys, I know yall have some great suggestions, I just need to get outside the box. I am way to aggrivated.