RE: ganged servos and 14 mz
Icebird,
How about some pictures of this setup.
Martin,
The only relevant issue I see with say a 3 legged Y type harness is that you would now be sharing 3 servo's off that one receiver lead. Probably not the best thing to do with a Giant Scale plane that draws a lot of current. I have never had to use a !QUOT!Match box!QUOT! but I am guessing that one of the many functions of that box is to help with current draw of many like ganged servos. Not sure there is much of any other way to get by with only 1 wire per wing half. If Icebird's contacts solution is solid and he has the ability for 3 separate servo leads that would definitely be the ticket but that system would have to be extremely solid before I would even consider using it. For now I would be labeling my wires carefully and paying close attention when plugging them in.