Last weekend I converted my Tiger 2 to a tail dragger. I didn't get to fly due to weather and had to wait until yesterday.
Only thing I can say is, take off isn't much different - just let the tail raise, build up a little more speed then add in a little elevator.


I put the plane on the CG machine and it was fine but when the plane got in the air - NOSE HEAVY. Got it trimmed out ok, but I can still feel it being nose heavy. The plane after assembly came out to be tail heavy so I had added 2 ounces of weight to the nose and an aluminum spinner. Going to take off the nose weight and test its CG again.

Landing wasn't bad at all although on the 2nd landing the plane seems to skip a little instead of stick like glue in the trike configuration.