RCU Forums - View Single Post - BUILDING your own VPP Setup
Thread: BUILDING your own VPP Setup
View Single Post
Old 04-28-2005 | 09:15 PM
  #29  
wakle's Avatar
wakle
Junior Member
 
Joined: Jun 2004
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
From: Los Osos, CA,
Default RE: BUILDING your own VPP Setup
The AXI 2208 series uses standard bearings. One 1/8 ID by 3/8 OD, and one 1/8 ID x 5/16 OD. I got mine from BOCA Bearings, but they are widely available.
wakle is offline  
Reply Like