RCU Forums - View Single Post - Needle Valve Setting YS .91AC
Thread: Needle Valve Setting YS .91AC
View Single Post
Old 04-29-2005 | 08:10 AM
  #3  
Winrich
Junior Member
 
Joined: Apr 2005
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
From: Augsburg, GERMANY
Default RE: Needle Valve Setting YS .91AC
Dave, there is plenty of room left (about 2 mm) between the needle body and the hex when the needle is fully closed in.



Winrich is offline  
Reply Like