RE: 1/4 SCALE CAP 232 FORUM
Wow, Thanks for all of the information!!!!!! Did some more run time on the os today, ran 2 tanks thru the beast doing the os recommended tuning.(wife is going to kill me when she see the dead spot in the lawn) I have seen some people block off one of the pitts muffler pipes because of a problem with the tank preasure. I am planning on pre heating the oil by running it thru some copper tubbing wrapped around the muffler. But I will look into replaceing the two elevator servos in the tail, and replaceing the push rods with some carbon fiber push rods. As for the batts, I have them mounted to the sided of the fuel tank and velcroed in. I also put the foam back in the front. I did mound a smoke oil tank and it is right on the cg.