RCU Forums - View Single Post - TT 91 4C Problem ... HELP!!!
View Single Post
Old 05-22-2005 | 11:01 AM
  #12  
tIANci's Avatar
tIANci
Senior Member
 
Joined: Jan 2004
Posts: 10,489
Likes: 0
Received 2 Likes on 2 Posts
From: Kuala Lumpur, MALAYSIA
Default RE: TT 91 4C Problem ... HELP!!!

w8ye - at 50% throttle it idles at about 2,700 RPM or so. The plane will not run off on the ground.

Jazzy - I did run it in, was running a little rich, can see smoke but was running it at about say 3,500 RPM only ... I did that for a tank, lasted about 30 mins. This dimple thing is now confusing me. All I can say is that during the TDC of the compression stroke the punch/dimple is OPPOSITE the pushrods. That to me is 6 at the o'clock, 12 o'clock would be right at where the push rods are.

Am gonna try again tomorrow and then see how she goes. Thanks guys!!!