You need to get with someone who knows what they are doing. You are not gonig to be able to safely build and fly this bird by reading stuff off of a message board. Whatever the work schedule of these other hobbyists is, you need to get with them--somehow. Even if they can't teach you how to fly (and I highly recommend you getting an instructor), maybe they can at least teach you how to not cut your fingers off. With your severe limit of knowledge about these things, you are going to get hurt--or worse, hurt someone else. That is the best advice I can give you concerning your question. In your other post, I explained how things work together and what not. Now, you are wanting someone to tell you how to install them and get them to work your control surfaces. Most of us on here have what you want--knowledge of the hobby. You need it, but you're not going to get it out of us over some message board. If you were to show up at my field tomorrow, I'd be happy to walk you through the whole process. I'd even teach you how to fly the thing, but not over the internet--it's impossible. Please, get some help before you end up in the hospital.