RCU Forums - View Single Post - Modeltech P47 tail wheel gear.....
View Single Post
Old 06-20-2005 | 10:46 AM
  #3  
Fastsky's Avatar
Fastsky
 
Joined: Dec 2001
Posts: 2,997
Likes: 0
Received 1 Like on 1 Post
From: Calgary, AB, CANADA
Default RE: Modeltech P47 tail wheel gear.....

The bracket broke about half way down the middle of the bracket, actually more like shattered! I changed to 2-56 rods all around. I just have to check the rudder throw and then get the Sullivan installed. That shouldn't take long and then that leaves the cowl and canopy. Will keep you updated, Fast![8D]